Website design By BotEap.comExperts say that you should empty your pool every 3 years at the most. Even though you can put chemicals in your pool to make it safe to swim in, pool water will lose its effectiveness at working with chemicals over time.

Website design By BotEap.comIf the idea of ​​emptying your pool sounds like a big task, don’t worry.

Website design By BotEap.comIt may seem like a lot of water to move, but you won’t have to sit there and monitor it all the time.

Website design By BotEap.comAll you need is something called a submersible sump pump. This is a device that you can rent at your local hardware store. By draining the pool yourself, you’ll save at least $100 by not hiring a pool service company.

Website design By BotEap.comOnce you have a pump, connect it to your sewage drain hole. There should be several places where you can find these openings. Sewer ports are covered by a round plastic cap and are usually located next to your house.

Website design By BotEap.comConnect the hose that came with the sump pump to the sewer port. Then lower the pump into the deepest section of your pool and turn it on. The pump will immediately start pumping water into the hose and sewer port where the city can reuse it.

Website design By BotEap.comIt should take several hours to empty your pool. Our pool is 10,500 gallons and it took 7 hours. Don’t let the pump run overnight because you’ll want to turn it off when the pool is empty. You don’t want to fry the thing.

Website design By BotEap.comWhen the pool is empty, be sure to fill it up as soon as you can. An empty pool could be distorted by the pressure of the groundwater surrounding the pool.

Website design By BotEap.comThat’s pretty much it. Pretty easy, right?