Website design By BotEap.comSmaller dogs are very popular these days. Just about every female celebrity has one in her arms on any given day, and whether it’s a Chihuahua, Australian Terrier, or American Cocker Spaniel, it shares the basic needs of every human on Earth. To satisfy your need for a space of your own, small dog houses are the best option.

Website design By BotEap.comAlthough a larger dog house seems to be good enough for smaller dogs, it is not. Smaller dogs should have smaller houses. It can be comfortable to have all the space you need to move, play and lie down, but the whole structure can be not only intimidating but downright scary for these little ones.

Website design By BotEap.comProbably the best option for finding a dog house that will fit a small dog is to make one. Actually, it’s not a difficult thing to do, as long as one knows how to drive a nail into a piece of wood, then everything will be fine from there.

Website design By BotEap.comTo begin with, there must be a plan. This incorporates the design of the doghouse, which also serves as the basis for other details such as the dimensions of the house and the materials needed to assemble it. It is recommended that the bottom of the doghouse does not touch the ground, especially in areas where the weather can be very bad.

Website design By BotEap.comFor the base of the dog house, the 4X4s are laid on their sides to finish with a floor that is about four inches off the ground. This allows enough air space under the house. A piece of plywood is then placed on top of the floor of the 4X4s.

Website design By BotEap.comThe house is then framed with the use of 2X2’s or 4X4’s. To make the roof slope toward the front of the house, the back wall must be at least four inches higher than the front wall. This makes it easier for rain and snow to fall off the roof. The driveway should also be framed with 2X2s, and one should make sure that there is ample space between the end of the driveway and the back of the dog house for convenient and easy movement of the dog.

Website design By BotEap.comThe plywood walls are then attached to the outside of the frames and the side pieces are cut based on the slope of the roof of the house. When attaching the plywood to the frame, it is more preferable to use wood screws to secure the walls in place. You can also have some wall space for a bit of insulation in colder places.

Website design By BotEap.comYour roof is going to be a piece of plywood. To facilitate later cleaning, it can be hinged at the back. One can simply lift the roof and clean the entire house quickly and easily. The exposed parts of the roof can then be painted to protect them from the different elements. A piece of tar paper on the roof can be useful to protect the house and its residents from inclement weather.

Website design By BotEap.comJust because one’s dog is small, he can be given any kennel to live in. Small dog houses are the best to fully accommodate the needs of these smaller breeds of canine friends.